Category

Eurorack Modules · Models

Modular synthesizer modules in the Eurorack format.

20 models

  • Model

    Make Noise Maths

    Synthesizer module · United States

    A Eurorack module family used for envelopes, LFOs, slew limiting, logic, mixing, and control-voltage utilities.

  • Model

    After Later Audio Monsoon

    United States

    A Eurorack texture synthesizer and granular processor by After Later Audio, adapting the Mutable Instruments Clouds design with the expanded Parasites firmware into a compact panel. It captures and granulates incoming audio for ambient textures, pitch shifting, and time stretching.

  • Technical line drawing of 4ms Spectral Multiband Resonator Eurorack module Model

    4ms Spectral Multiband Resonator

    United States

    The Spectral Multiband Resonator (SMR) is a 26 HP Eurorack module that processes audio through six resonant filter channels chosen from twenty tuned frequencies shown on its LED ring. It can work as a filter bank, vocoder, or struck-resonator, and quantizes its filter frequencies to selectable musical scales for harmonizing and remixing sound.

  • Technical line drawing of 2hp VCO Eurorack module Model

    2hp VCO

    United States

    The 2hp VCO is an analog voltage-controlled oscillator built around the reissued Curtis CEM3340 chip. It outputs triangle, sawtooth, and square waveforms simultaneously, with pulse-width modulation, linear FM, and hard sync. Accurate 1V/octave tracking across more than ten octaves suits both melodies and dramatic pitch sweeps.

  • Model

    Make Noise Morphagene

    Eurorack module · United States

    The Make Noise Morphagene is a Eurorack tape and microsound module that reimagines tape splicing and granular synthesis. It records sound into 'reels,' then lets users slice, reorder, and granularize the material under CV control for evolving textures.

  • Model

    Make Noise DPO

    Eurorack module · United States

    The Make Noise DPO (Dual Prismatic Oscillator) is an all-analog complex oscillator Eurorack module built from two voltage-controlled oscillators designed for generating complex, harmonically rich waveforms, with hard sync, dedicated FM and modulation buses, and extensive waveshaping.

  • Model

    Make Noise René

    Eurorack module · United States

    The Make Noise René is a Cartesian music sequencer Eurorack module that frees the analog step sequencer from linearity using a coordinate grid. It provides multiple CV and gate outputs, stores up to 64 complete programming states, and (in René 2) adds a Z-axis for modulating between stored sequences.

  • Model

    Make Noise QPAS

    Eurorack module · United States

    The Make Noise QPAS (Quad Peak Animation System) is a stereo analog filter Eurorack module built from four identical state-variable filter cores. It delivers simultaneous low-pass, band-pass, high-pass, and a unique 'Smile Pass' output, with a pre-filter stereo VCA and flexible mono/stereo routing for animated, vocal-like filtering.

  • Model

    After Later Audio Beehive

    United States

    A compact 8 HP Eurorack macro-oscillator by After Later Audio, a micro adaptation of the Mutable Instruments Plaits design (also sold as uPlaits). It offers multiple synthesis models, from virtual-analog and FM to physical-modeling and percussion engines, in a single voice module.

  • Model

    After Later Audio Cara

    United States

    A Eurorack random voltage and CV source by After Later Audio, a compact adaptation of the Mutable Instruments Marbles design (also sold as uMarbles). It generates clocked random gates and continuous control voltages with controllable rate, spread, and bias for generative patches.

  • Technical line drawing of 4ms Dual Looping Delay Eurorack module Model

    4ms Dual Looping Delay

    United States

    The Dual Looping Delay (DLD), designed by 4ms with Gary Hall, is a 20 HP Eurorack module with two delay and looping channels synchronized to a shared time base. It combines digital delay, looping, and sample-tight clock sync, with reverse playback, infinite hold, per-channel send and return, and up to roughly three minutes of delay or loop time per channel.

  • Technical line drawing of 2hp LFO Eurorack module Model

    2hp LFO

    United States

    The 2hp LFO is a voltage-controlled low-frequency oscillator offering eight waveforms with smooth morphing between them for complex modulation shapes. Its range spans from a thirty-second cycle up to audio rate. It provides two simultaneous outputs and a reset input for syncing to a clock.

  • Technical line drawing of 2hp Mix Eurorack module Model

    2hp Mix

    United States

    The 2hp Mix is a four-channel mixer for audio or control-voltage signals. Each of the four inputs has its own level control, and they are summed into a single output. It is DC-coupled, so it handles both audible signals and modulation with a low noise floor.

  • Technical line drawing of 4ms Quad Pingable LFO Eurorack module Model

    4ms Quad Pingable LFO

    United States

    The Quad Pingable LFO (QPLFO) is a 12 HP Eurorack module with four independent low-frequency oscillators whose tempo can be tapped or clock-synced through a ping input. A skew control morphs each waveshape between pluck, ramp, and triangle forms, and the channels can modulate, trigger, and reset one another for evolving modulation.

  • Technical line drawing of 2hp ADSR Eurorack module Model

    2hp ADSR

    United States

    The 2hp ADSR is a four-stage linear envelope generator with two selectable ranges. Its attack, decay, sustain, and release stages can each be adjusted independently to build simple or complex multi-segment envelopes. It is well suited to shaping filters, VCAs, and oscillators.

  • Technical line drawing of 4ms Stereo Triggered Sampler Eurorack module Model

    4ms Stereo Triggered Sampler

    United States

    The Stereo Triggered Sampler (STS) is a 20 HP Eurorack module that records and plays back stereo WAV samples from a removable microSD card, with two files playable at once. It offers 1V/octave pitch control, CV control of sample selection, start point, and length, reverse and granular playback, and on-board recording and editing without a computer.

  • Technical line drawing of 4ms Ensemble Oscillator Eurorack module Model

    4ms Ensemble Oscillator

    United States

    The Ensemble Oscillator (EnOsc) is a 16 HP Eurorack module built around sixteen sine oscillators that can be tuned together to chords, scales, or a harmonic series. It blends additive, frequency-modulation, phase-distortion, and wavefolding synthesis with mono or stereo output to explore the range between musical chords and evolving textures.

  • Technical line drawing of 2hp Euclid Eurorack module Model

    2hp Euclid

    United States

    The 2hp Euclid is a rhythmic pattern generator based on the Euclidean algorithm, which spreads a chosen number of active steps as evenly as possible across a sequence. It produces repeating rhythmic patterns useful across many electronic music styles and offers voltage control over the pattern generation.

  • Technical line drawing of 4ms Pingable Envelope Generator Eurorack module Model

    4ms Pingable Envelope Generator

    United States

    The Pingable Envelope Generator (PEG) is a 20 HP Eurorack module with two envelope generators whose total time is set by a tapped or clocked ping, with each envelope running as a multiple or division of that ping from /8 to x8. Each channel offers CV control of shape and skew plus attack-decay, attack-release, cycling, and tap-tempo options.

  • Technical line drawing of 2hp TM Eurorack module Model

    2hp TM

    United States

    The 2hp TM is a probabilistic random sequence generator inspired by the work of Alan Turing. Controls for randomness, sequence length, and output range let it act as a controlled random voltage source or, paired with a quantizer, an evolving melodic sequencer. Adjusting probability and length lets it produce a practically endless variety of patterns.